
Mitsubishi LANCER DRESS UP 02-06
![]() |
Black Headlights for 04-06 models
These lights are direct replacements for 04-06 Lancers. They are DOT approved and built to perform as well as stock. Unfortunately if you plan to paint your own they will probably leak. These lights will not. Price is for the pair of lights.
$339 |
![]() |
Chrome Headlights for 04-06 models
These lights are direct replacements for 04-06 Lancers. They are DOT approved and built to perform as well as stock. Unfortunately if you plan to paint your own they will probably leak. These lights will not. Price is for the pair of lights.
$339 |
![]() |
Black
Tail Lights
04-06 |
|
Carbontrix LANCER/RALLIART 04-05 FRONT LIP We call it the Jim Anderson Special! This lip is a wonderful way to dress up your Lancer or Ralliart. Fitment and finish unbeleivable. We have both Carbon Fiber version and Fiberglass available. Fiberglass Version $239 Add Item Carbon Fiber Version $369 Add Item |
![]() |
Carbontrix LANCER/ EVO 3 gauge Dash Conversion-Carbonfiber fit 02-06 Lancers,EVOs & Ralliart This Conversion Panel moves the radio and allow for 3 gauges. Made of Real CF is will still accomodate heater controls. Holds 52mm or 60mm guages.
$139 |
![]() |
Carbontrix LANCER/ EVO 8 Fiberglass 2 gauge pillar set fit 02-06 Lancers,EVOs & Ralliart These pillars are designed to mount over the top of originals and are designed to be paint match to your interior or exterior. Smooth finish really looks cool and they will accomodate 52-60mm guages.
$99 |
![]()
![]() |
ROAD///RACE-CARBONTRIX
EVO 9 BODY KIT Click her to see it all. More pics of whole kit! |
![]() |
CarbonTrix K2 Style Front Bumper. This is similar to the KEN STYLE. Made of fiberglass, this quality bumper has a great look to it and perfect for big intercooler. Reagrdless, the uniform thickness of the part and superior fitment makes it a value. Complete body kit is available. Call to order complete kit. $249 Note: License holder comes without holes. This bumper is also available in Carbon Fiber! Side skirts and rear bumpers also available. Buy them all at once and SAVE $ on shipping. Click here to see these items. |
![]() |
CARBONTRIX CARBONFIBER EYELIDS/FIBERGLASS EYELIDS 04-06
Ralliart and Sportback and Lancer Carbon
Fiber Set Fiberglass Set $49 Add Item
|
|
Black Headlights for 02-03 models
These lights are direct replacements for 02-03 Lancers. They are DOT approved and built to perform as well as stock. Unfortunately if you plan to paint your own they will probably leak. These lights will not. Price is for the pair of lights. NEW LOWER PRICE $249 |
|
![]() |
CARBONTRIX- Carbon Fiber Fuse Box Cover. For Lancer OZ, ES, RA, & EVO 8
This is a handsome carbon fiber fuse box cover that just covers your OEM plastic one. Just install using 2 sided tape and putit in place. Covers that ugly plastic cover.
$79 |
|
LANCER/EVO Carbon Fiber Wing.
02-03
This is OEM replica of OZ/ EVO low wing. It is made of real carbon
Fiber and bolts right in. It tips the scales at less than 3 lbs. Beautifully
crafted and polished finish.
Expect to do some fitment on some models. 329.00 |
|
Road Race Dual Gauge Carbon Fiber A-Pillars
02-06 NOW FITS 60MM GAUGES ALSO!!
|
| \ |
EVO
7 Style Tail Lights
02-03 These tail lights are the latest and best available for the U.S. Lancer. Fitment of these lights are excellent and best of all they are DOT approved! Do not waste your money on lesser tail lights that leak, crack or are not DOT approved! Does not fit EVO 8. Price is for the pair of lights. 149.00 Add Item |
|
Chrome Tail Lights
02-03
These tail lights are the latest and best available for the U.S. Lancer. Fitment of these lights are excellent and best of all they are DOT approved! Do not waste your money on lesser tail lights that leak, crack or are not DOT approved! Price is for the pair of lights. 149.00 Add Item |
|
Carbon Fiber Glove Box Gauge Plate
02-04
This CF plate secures in the dash of your LANCER or EVO and can be used to mount gauges, AFCs, turbo timers, boost controllers, or other devices. An attractive way to secure these items and keep them out of site of thieves! 69.00 Add Item |
|
Carbon Fiber Eye Lids
02-03
These eyelids are real carbon fiber and do not need to be painted. These eyelids are the perfect way to accent the look of your Lancer. They are beautifully finished and one of a kind. Eyelids require 2 sided tape or glue to install. Not included. 79.00 Add Item |
|
EVO Style Carbon Fiber Front Grill (Version
4.0)
02-03
This grill is a direct replacement for the stock in hood grill on the Lancer. This is real carbon fiber and nothing looks as good on the Lancer. Comes with aluminum mesh that you install. Ask for an emblem if you want to put it on the grill. 199.00 Add Item |
|
Carbon Fiber Shift Knob
02-04
These are high quality shift knobs. Designed to fit most vehicles. Comes with rubber grommets and set screws for perfect fitment! 69.00 Add Item |
|
Stainless Steel Shift Knob
02-04
These are high quality shift knobs. Designed to fit most vehicles. Comes with rubber grommets and set screws for perfect fitment! 49.00 Add Item |
|
B&M Short Shifter
02-06
|
|
|
|
|
Carbon Fiber EVO Style Hood Duct
02-06
This duct is REAL carbon fiber. It can be installed on hood and riveted into place. It is similar to LANCER EVOLUTION duct. Designed for cold, undisturbed air flow to filter. Requires cutting a small hole in your hood. NOTE: Duct is approximately 6 x 9 inches. 59.00 Add Item |
|
Carbon Fiber A-Pillar Gauge Pod
02-06
This gauge pod is made of real carbon fiber. It is designed to fit the Lancer and hold one 52mm or 2 1/16 gauge. It can also accomodate a gauge as large as 60mm. 49.00 Add Item |
|
Lancer Carbon Fiber Hood Out of Stock |
|
EVO/ LANCER B-Pillar Covers These cover fit right over the OEM b-pillars. They are made of real Carbon Fiber and are easy to install. THESE PILLAR COVER ONLY FIT EVO 8 , RALLIART and OZ/LS LANCERS WITH A SUNROOF. $189 for the pair.
|
|
Lancer EVO Style Front Grill (Version 4.0)
02-03
This grill is a direct replacement for the stock in hood grill on the Lancer. We would like to think it is an attractive improvement to the original. Grill is fiberglass and comes unpainted so that you can color match to your car or black it out. Comes with aluminum mesh that you install after you prep and paint fiberglass portion. 169.00 Add Item |
|
Powder Coated Lancer Valve Cover
02-06 |
|
Carbon Fiber Reflector's for US Lancer
02-03
These carbon fiber reflectors offer an alternative to the amber stock reflectors. These reflectors use existing screws and install exactly in place of the amber reflector. Looks Great! 39.00 discontinued |
|
Fiberglass Eyelids
02-03
These eyelids are fiberglass and come unpainted. Eyelids are the perfect way to accent the look of your Lancer. You can color match them or spray them black. Eyelids require 2 sided tape or glue to install. Not included. 49.00 Add Item |
|
Carbon Fiber Tail Lights
02-03
These tail lights are the latest and best available for the U.S. Lancer. Fitment of these lights are excellent and best of all they are DOT approved! Do not waste your money on lesser tail lights that leak, crack or are not DOT approved! 149.00 Add Item |
|
ROAD/RACE- CARBONTRIX CARBON FIBER Radiator/Bumper Dress Up Kit. Fits 02-03 Lancer OZ, ES, LS. Dress up your engine compartment and cover up ugly radiator support and bumper braces. Includes both pieces and requires no drilling or cutting. Bolt right in. 129.00 Add Item |
|
![]() |
ROAD/RACE- CARBONTRIX CARBON FIBER Cubby Hole Gauge Plate Fits:
02-06 Easy to
install this plate fits exactly into cubby hole opening. Requires no
cutting other than your desired holes for gauges or switches. Mount
gauges or switches with this slick plate. Real Carbon FIBER! |
|
Gunmetal Tail Lights
02-03
These tail lights are the latest and best available for the U.S. Lancer. Fitment of these lights are excellent and best of all they are DOT approved! Do not waste your money on lesser tail lights that leak, crack or are not DOT approved! Price is for the pair of lights. 149.00 Add Item |
|
02-06 This is
a real CF gauge holder designed to hold 2- 52mm or 60mm gauges. This
is a purpose built piece designed just for this a-pillar. Fits above
speaker hole on EVOs or LS Lancers or can be mounted lower on other
models. Easy to install. If this is not enough for you check out our
complete a-pillar sets in the dress up section.
|
![]() |
NEW LANCER CHROME TAILS. 04-06 DOT Approv. These part are fantastic. We use them on our car and fitment is perfect. They are dirtect OEM replacements. We sell they to MItsubishi Dealerships for replacements. Perfect fit and finish to DOT specs and at a cost that is half of what Mitsubishi charges. $149 for the set! |
© 2003 ROAD///RACE MOTORSPORTS |